HOPPE Sliding Door Multipoint Lock Systems and Strike Plates

HOPPE's sliding door multipoint locks represent a specialized segment of European-style door security hardware, designed to retrofit onto most wood sliding patio doors. MPLocks carries the complete range of HOPPE 2-point sliding door locks and their corresponding strike plates, giving you everything needed for a full replacement or upgrade. These locks operate with a manual locking function—when the door closes, a black tab on the faceplate is depressed, allowing the handle to engage both hooks simultaneously for reliable security at two points along the door edge.

Two-Hook Design for Enhanced Sliding Door Security

Each HOPPE sliding door lock in this collection features hooks positioned above and below the handle, creating balanced engagement with the door frame. This dual-hook configuration distributes the locking force across a wider area compared to single-point locks, reducing stress on the door and frame while improving resistance to forced entry. The locks are available with either 30mm or 35mm backsets and 16mm or 20mm faceplates, allowing you to match your existing door cutout dimensions precisely.

Matching Strike Plates for Complete Installation

A sliding door lock is only as secure as its strike plate installation. This collection includes HOPPE strike plates in 30-inch lengths with brushed stainless steel finishes that resist corrosion in exterior applications. Several strike options feature adjustable stepped (raised) pockets that allow fine-tuning of the hook engagement depth—critical for ensuring smooth operation and proper security when doors settle or shift seasonally. U-channel strikes are also available for specific installation requirements.

• HOPPE HLS9000 Sliding Door Handle Sets
• HOPPE Sliding Door Hardware Collection
• Fuhr Sliding Door Multipoint Locks

Selecting the Right Backset and Faceplate Width

When replacing a sliding door multipoint lock, accurate measurements are essential. The backset—measured from the edge of the door to the center of the handle hole—must match your existing door prep. HOPPE sliding door locks are available in 30mm (1-1/8 inch) and 35mm (1-3/8 inch) backsets. Faceplate width is equally important; measure your existing mortise pocket to determine whether you need the 16mm (5/8 inch) or 20mm (3/4 inch) option. Using the wrong dimensions can result in improper fit, misaligned hooks, or the need for additional door modifications.

If you're unsure which HOPPE sliding door lock matches your existing hardware, our team can help you confirm compatibility. Call (816) 221-6543 to speak with a multipoint lock specialist, or use our free Multipoint Lock Identifier to submit your lock details for expert review.