HOPPE Handle Parts - Replacement Door Hardware

Replacement Parts for HOPPE Multipoint Lock Handles

When a multipoint lock handleset needs repair, the issue often comes down to a worn spindle, missing bushing, or incorrect extender length rather than the entire handle assembly. MPLocks stocks the individual HOPPE handle parts that keep your door hardware functioning smoothly, eliminating the need to replace complete handlesets when only a small component has failed. These parts are designed for compatibility with HOPPE HLS9000, HLS7, and FUHR multipoint systems commonly found on European-style entry doors.

Spindles and Extenders for Proper Handle Alignment

Handle spindles connect the interior and exterior levers through the door, and selecting the correct length is critical for smooth operation. HOPPE spindles are available in six different lengths to accommodate various door thicknesses and lock configurations. Handle extenders, offered in ten finishes to match your existing hardware, bridge the gap between the handle and the lock mechanism when additional reach is needed. Choosing the right spindle length prevents binding or excessive play in the lever action.

Bushings, Gaskets, and Hardware Packs

Handle bushings reduce friction and wear between moving parts, available in gold or clear finishes to complement your handle trim. Gaskets create a proper seal between the handle plate and door surface, helping prevent air and moisture infiltration. Set screws are sized specifically for HOPPE and FUHR handles, ensuring secure attachment without damaging the spindle. These small components often make the difference between a handle that feels solid and one that wobbles or sticks.

• HOPPE HLS9000 Hinged Door Handles and Accessories
• HOPPE Spindles and Set Screws
• FUHR Handle Parts

Measuring for the Correct Handle Components

Before ordering spindles or extenders, measure your door thickness and the distance from the handle mounting surface to the lock spindle hole. Spindle length should account for both the door thickness and any backplate depth. If your existing spindle shows wear patterns or binding marks, note which section is affected to help determine whether you need a different length or simply a replacement of the same size. When in doubt, measure the old spindle directly from end to end.

If you need help confirming which HOPPE handle parts fit your multipoint lock system, call our team at (816) 221-6543 to speak with a knowledgeable specialist. You can also use our free Multipoint Lock Identifier to submit details about your current hardware for expert review and replacement recommendations.