MPLock Identifier
Identify your lock now!
Identify your lock now!
Hoppe HLS9000 Accessories - Handle Set Parts
HOPPE HLS9000 accessories include replacement lever handles, backplates, cylinders, bushings, and gaskets for European-style multipoint lock systems. Whether you need a single component or a complete handle set, these parts are designed for precise compatibility with HOPPE's HLS9000 platform—one of the most widely used multipoint lock systems in premium doors.
Hoppe HLS9000 Accessories – Handle Set Parts
Handle Bushings – Comparison
Bushings fit between the lever handle and the escutcheon plate hole to ensure smooth operation and proper alignment. Compatible with most Hoppe and Fuhr door handles.
| SKU | Description | Color | Inside Dia. (Handle) | Outside Dia. | Escutcheon Hole Dia. | Depth | Sold As |
|---|---|---|---|---|---|---|---|
| 649798 | Clear Plastic Handle Bushing | Clear | 11/16 in. (17.5mm) | 15/16 in. (23.8mm) | 13/16 in. (20.6mm) | 5/16 in. (7.9mm) | Each (min. qty 2) |
| 386060 | Gold Tone Plastic Handle Bushing | Gold Tone | 11/16 in. (17.5mm) | 15/16 in. (23.8mm) | 13/16 in. (20.6mm) | 7/32 in. (5.6mm) | Pair |
| 3851396 | Handle Bushing & O-Ring Kit – with Buna Rubber O-Rings for weatherproofing | Clear bushing / Black O-rings | — | — | — | — | Kit (1 bushing + 2 O-rings) |
| 2080737 | Thumb-Turn Bushing for Hoppe Sliding Patio Doors | — | 7/16 in. (11mm) ID | 3/4 in. (19mm) OD | N/A – sliding door | — | Each |
* 649798 and 386060 share the same hole diameters and fit all Hoppe/Fuhr escutcheon plates. The O-ring kit (3851396) is required by some OEM manufacturers to meet water infiltration test standards.
Foam Gaskets – Escutcheon Plate Compatibility
Underplate foam gaskets seal air and moisture infiltration between the escutcheon plate and the door surface. Match by escutcheon plate model number.
| SKU | Compatible Escutcheon / Backplate | Width | Length | Handle Series | Sold As |
|---|---|---|---|---|---|
| 8781675 | M216N Escutcheon | 1-1/16 in. (27mm) | 8-3/8 in. (213mm) | HLS9000 | Each |
| 2737559 | M216 / M2167N Trim Plate | 1-1/4 in. (31.8mm) | 9-5/8 in. (244.5mm) | HLS7 | Each |
| 2737567 | M2172N Backplate | 1-3/8 in. (34.9mm) | 9-3/4 in. (247.7mm) | HLS7 | Each |
| 8781683 | M374N Escutcheon | — | — | HLS9000 | Each |
| 2408595 | M3955N & M3965N Escutcheon | 1-7/8 in. (47.6mm) | 9-1/2 in. (241.3mm) | HLS9000 Colonial | Each |
| 10715093 | M2161N Escutcheon (Dallas series) | — | — | HLS9000 Dallas | Each |
* Match gasket by escutcheon plate model number stamped on the back of your existing plate. Lever handles, backplates, and cylinders for the HLS9000 are coming soon to this collection.
Replacement Parts for HOPPE HLS9000 Multipoint Lock Systems
The HOPPE HLS9000 series represents a comprehensive ecosystem of multipoint lock hardware found in many European-style entry doors across North America. When a component wears out or breaks, you typically don't need to replace the entire lock system—just the specific part that failed. MPLocks carries the individual accessories that keep your HLS9000 system functioning properly, from the lever handles you operate daily to the bushings and gaskets that ensure smooth, weather-tight performance. Each component is manufactured to HOPPE's exacting standards for reliable, long-lasting operation.
Component-Level Replacement Flexibility
One of the key advantages of the HOPPE HLS9000 platform is its modular design. If your exterior handle shows wear from years of use, you can replace just that lever without disturbing the lock mechanism or interior hardware. The same applies to backplates that may have cosmetic damage, cylinders that need rekeying or upgrading, and gaskets that have deteriorated over time. This approach saves money compared to full system replacement while maintaining the security and aesthetic integrity of your door.
OEM Quality for Reliable Performance
Every accessory in this collection is built to work seamlessly with existing HLS9000 installations. The lever handles maintain proper engagement with the internal spindle mechanisms, backplates align correctly with existing screw patterns, and cylinders fit the precise Euro profile dimensions required. Using genuine HOPPE components ensures your multipoint lock continues to operate as designed, with all locking points engaging properly when you lift the handle.
Finding the Right Accessory for Your System
When ordering replacement accessories, the most important details are your current backplate style and dimensions. Measure the distance between screw holes on your existing backplate, note whether you have a contemporary or traditional design, and identify the finish color. For cylinders, measure the overall length and confirm whether you need a keyed or thumbturn configuration. Most HLS9000 accessories follow standardized patterns, but confirming these measurements prevents ordering delays.
If you're unsure which accessory fits your HOPPE HLS9000 system, our team can help you identify the correct part. Call (816) 221-6543 to speak with a multipoint lock specialist, or use our free Multipoint Lock Identifier to submit your hardware details for expert review.
Confused By the Jargon? We've Got You
Multipoint Lock Glossary
Pair large text with an image to give focus to your chosen product, collection, or blog post. Add details on availability, style, or even provide a review.
