HOPPE Key-Operated Multipoint Locks

HOPPE Key-Operated Multipoint Lock Systems for Secure Entry Doors

Key-operated multipoint locks represent a different approach to door security compared to lever-activated systems. Rather than using a handle to retract locking points, these HOPPE locks rely on the cylinder itself to drive the gear mechanism—making them ideal for applications where lever hardware isn't desired or where additional key control is preferred. MPLocks carries these gear-driven systems along with the essential strike plates, rosettes, and accessories needed for complete installations or repairs on European-style entry doors.

Standard and Egress Function Options

HOPPE key-operated locks come in two distinct function types to meet different building requirements. Standard function locks use a 5/16 inch handle shaft and require two key turns to fully engage or disengage all locking points. Egress function locks feature a larger 3/8 inch hub that allows a lever to retract both the latch and extended bolts from inside—meeting code requirements for emergency exit while maintaining key-only operation from the exterior. Understanding which function your door requires is critical before ordering replacement parts.

Complete System Components Available

Beyond the lock mechanisms themselves, this collection includes the supporting hardware that makes these systems function properly. Strike plates designed specifically for swinghook and round bolt configurations ensure proper engagement at the frame. Euro profile cylinder rosettes in both round and square designs provide a finished appearance around the keyhole, available in stainless steel and other finishes. Spindle sleeves help adapt standard components to egress function locks with larger hub diameters.

• HOPPE Multipoint Lock Hardware and Replacement Parts
• Euro Profile Cylinders for Multipoint Locks
• HOPPE Latch and Deadbolt Strike Plates

Measuring for Key-Operated Lock Replacement

When replacing a key-operated multipoint lock, accurate measurements are essential. Start by confirming your door height falls within the 73-5/8 inch to 94-1/2 inch range these locks accommodate. Verify the backset—the distance from the edge of the door to the center of the cylinder bore—matches the standard 1-3/4 inch (45mm) specification. Also note whether your existing system uses standard or egress function, as this determines both the lock mechanism and any adapters needed for proper lever or spindle compatibility.

If you're unsure which key-operated lock configuration matches your door, our team can help you identify the correct components. Call (816) 221-6543 to speak with a multipoint lock specialist, or submit your lock details through our free Multipoint Lock Identifier for expert review and replacement recommendations.