Fuhr Shootbolt Multipoint Lock Parts — Replacement Shootbolts & Hardware

Fuhr Shootbolt Multipoint Lock Replacement Options

Fuhr shootbolt multipoint locks were a popular choice for residential hinged patio doors throughout the 1990s and 2000s, particularly in Caradco door systems. These locks utilized vertical shootbolts—metal rods that extend from the lock body into strikes at the top and bottom of the door frame—combined with rollers or deadbolts for comprehensive security. When these locks fail or wear out, finding the right replacement requires matching the backset, PZ spacing, and handle height of your original hardware. MPLocks carries the complete range of Hoppe replacement kits engineered specifically for these discontinued Fuhr systems.

Direct-Fit Replacement Kits for Discontinued Fuhr Locks

The Hoppe replacement kits in this collection are designed to work with your existing door prep, meaning you won't need to re-mortise or drill new holes in your door. Each kit includes the gear box, shootbolt extensions, and necessary components to restore full functionality. These replacements feature a 35mm backset and 92mm PZ spacing, matching the original Fuhr specifications. While the original Fuhr locks often included both rollers and shootbolts, the Hoppe replacements utilize shootbolts only, which simplifies installation while maintaining excellent security.

Options for Both Active and Inactive Door Panels

French door configurations require different lock setups for each panel. The active door—the one you open regularly—needs a fully operational multipoint lock with cylinder access and handle control. The inactive or passive door requires a lock that secures from the inside only. This collection includes replacement kits for both panel types in 77-inch and 93-inch door heights, ensuring you can find the correct match for your Caradco French door system regardless of which panel needs service.

• Fuhr Multipoint Lock Replacement Parts
• Hoppe Shootbolt Multipoint Locks
• Hoppe Shootbolt Strike Plates

Confirming Handle Height and Door Measurements

Before ordering a replacement kit, measure your existing handle height from the bottom of the door to the center of the handle spindle—Fuhr locks in this collection typically require a 35-1/2 inch handle height. The Hoppe replacement kits are adjustable and require trimming during installation to achieve the correct handle position. Also verify your door height (77 inches or 93 inches for standard Caradco doors) and confirm the backset by measuring from the edge of the door to the center of the cylinder hole, which should be 35mm or approximately 1-3/8 inches.

If you're unsure which replacement kit fits your discontinued Fuhr shootbolt lock, our team can help you identify the correct part. Call (816) 221-6543 to speak with a multipoint lock specialist, or submit your lock details through our free Multipoint Lock Identifier for a personalized replacement recommendation.