HOPPE Tongue Complete Assemblies for HLS9000 Multipoint Locks

Complete HOPPE Tongue Multipoint Lock Assemblies for Door Replacement Projects

When a multipoint lock system fails or becomes obsolete, finding a compatible replacement can be challenging—especially for European-style doors with discontinued hardware. MPLocks carries HOPPE HLS9000 tongue complete assemblies that serve as direct replacements for many Fuhr roundbolt locks, ESSVE systems, and other multipoint configurations. These kits bundle the essential components needed for a full lock replacement: bottom gear with integrated deadbolt and spring latch, upper tongue extensions, and stainless steel mounting screws. Tongue-style locks use rectangular bolts that extend into the door frame, providing secure engagement at multiple points along the door edge.

Designed for Compatibility with Multiple Multipoint Lock Brands

These HOPPE tongue assemblies are engineered to replace a variety of existing multipoint lock systems, including discontinued Fuhr roundbolt locks, older Hoppe configurations, Roto systems, and ESSVE locks. The kits accommodate common backset measurements of 35mm, 45mm, and 60mm with 92mm PZ spacing for Euro cylinder compatibility. Whether you're working on a Peachtree hinged door, an MW Door Company installation, or a custom European entry door, these assemblies provide a pathway to restore full multipoint functionality without modifying the door itself.

Available in Multiple Faceplate Widths and Configurations

HOPPE tongue assemblies come in 16mm (5/8 inch) and 20mm (25/32 inch) faceplate widths to match your existing door prep. Standard handle height is 36 inches, though some kits can be trimmed for doors with lower handle positions. Tongue locations are measured from the handle centerline, with standard bottom positions at 24.41 inches, 26.42 inches, and 29.65 inches, and upper positions ranging from 29.25 inches to 62.76 inches. This variety ensures you can find an assembly that aligns with your door's existing cutouts and strike plate locations.

• HOPPE Tongue Multipoint Lock Hardware
• Fuhr Tongue Multipoint Lock Replacement Parts
• HOPPE HLS9000 Euro-Style Multipoint Locks

Measuring for the Right Tongue Assembly Kit

Before ordering, measure your existing lock's backset (distance from faceplate edge to cylinder center), PZ spacing (handle center to cylinder center), and faceplate width. Note the overall door height and current tongue positions relative to the handle—this determines which extension lengths you'll need. Most kits in this collection fit doors between 69 and 94 inches tall, but taller doors may require different top extensions. If your original lock has hooks or roundbolts rather than tongues, these assemblies can still work as replacements since the strike plate locations typically align within acceptable tolerances.

Need help confirming which HOPPE tongue assembly fits your door? Call our team at (816) 221-6543 to speak with a real expert who can review your measurements and recommend the right kit. You can also submit your lock details through our free Multipoint Lock Identifier for personalized replacement recommendations.