HOPPE Swing Hook & Shootbolt Multipoint Locks — HLS9000 Replacement Hardware

HOPPE HLS9000 Swing Hook and Shootbolt Lock Assemblies for Maximum Security

The HOPPE HLS9000 swing hook and shootbolt multipoint lock system represents one of the most secure configurations available for European-style entry doors. By combining swing hooks that engage horizontally with shootbolts that extend vertically into the frame, these assemblies create multiple locking points that resist both prying and forced entry attempts. MPLocks carries the complete range of bottom gear assemblies and middle extensions needed to build or replace these robust 5-point locking systems, available in 35mm, 45mm, 60mm, and 70mm backset configurations.

Dual-Action Locking for Superior Protection

What sets swing hook and shootbolt configurations apart from standard multipoint locks is their multi-directional engagement. The swing hooks rotate into strike pockets to resist horizontal force, while shootbolts extend into the top and bottom of the frame to prevent vertical manipulation. This combination is particularly effective for doors in high-traffic areas or locations requiring enhanced security. The standard configuration positions the bottom swing hook at 24.41 inches below the handle, with the shootbolt at a 36-inch handle height.

Complete Bottom Gear Assemblies with Pre-Attached Shootbolts

These HOPPE bottom gear assemblies come with shootbolts already attached, simplifying the installation process and ensuring proper alignment. Whether you're working with a 1-3/8 inch, 1-3/4 inch, 2-3/8 inch, or 2-3/4 inch backset door, you'll find assemblies designed to match your existing frame preparation. The 16mm faceplate width is standard across the HLS9000 series, maintaining compatibility with other HOPPE multipoint lock components.

• HOPPE HLS9000 Swing Hook Multipoint Locks
• HOPPE Shootbolt Multipoint Lock Hardware
• HOPPE Shootbolt Strike Plates

Selecting the Correct Backset and Handle Height

Accurate measurement is essential when replacing swing hook and shootbolt assemblies. The backset—measured from the edge of the door to the center of the handle spindle—must match your existing lock preparation. Common backsets include 35mm, 45mm, 60mm, and 70mm. Additionally, verify your handle height measurement, as these assemblies are designed for 36-inch handle heights. Taking photos of your current hardware and measuring the faceplate width can help confirm compatibility before ordering.

Need help confirming the right swing hook and shootbolt assembly for your door? Call our team at (816) 221-6543 to speak with a real expert who can walk you through the selection process. You can also use our free Multipoint Lock Identifier to submit your lock details for a personalized replacement recommendation.