All Peachtree

Peachtree IPD Citadel Multipoint Lock Replacement Parts

Peachtree's Insulated Patio Door (IPD) Citadel system represents a distinctive approach to multipoint security, using steel door construction with three-point locking that engages simultaneously when the handle is lifted. MPLocks carries the specific replacement components needed to restore these systems to proper operation, from the auxiliary locking modules that create the bolt engagement to the drive bars that connect the center lock with top and bottom locking points. Whether you're dealing with a worn latch, damaged strike plate, or need to replace an entire passive lock assembly, these parts are designed for exact compatibility with Peachtree IPD doors.

Three-Point Locking System Components

The Peachtree IPD system operates through coordinated engagement of three latch points that transform into rigid bolts when locked. The auxiliary locking modules contain spring-loaded mechanisms that extend and lock in place, while the drive bars—available in lengths for both 6 foot 8 inch and 8 foot door heights—connect these components to the center lock. Understanding your door's handing (XO configuration) is essential when ordering auxiliary modules, as these components are specifically designed for either the active or passive door panel in French door applications.

Compatible with Multiple Door Brands

While designed for Peachtree IPD Citadel doors, several components in this collection also work with related door systems. The passive multipoint locks with 70mm backset and radius faceplate are compatible with doors from multiple manufacturers, and the strike plate sets fit standard 1-3/4 inch thick doors used across various brands including Pella entry doors and Trilennium-equipped systems. This cross-compatibility can be helpful when sourcing parts for older installations where the original manufacturer's parts may be limited.

• Trilennium Multipoint Lock Replacement Parts
• Trilennium Strike Plates for Multipoint Locks
• Multipoint Lock Strike Plates

Measuring for Peachtree Drive Bars and Lock Components

When replacing drive bars, accurate door height measurement is critical—the top auxiliary drive bar for 6 foot 8 inch doors measures 33-3/16 inches, while the 8 foot door version extends to 48-1/8 inches. The bottom auxiliary drive bar at 33-3/16 inches fits both door heights. For passive multipoint locks, confirm your door's handing (left or right) by standing inside and noting which side the hinges are on. The 70mm backset measurement should be verified from the edge of the door to the center of the handle spindle hole before ordering.

Finding the exact replacement part for older Peachtree IPD systems can be challenging, especially since some components are discontinued. If you need help identifying the correct drive bar length, auxiliary module handing, or strike plate configuration, call our team at (816) 221-6543 for personalized assistance. You can also use our free Multipoint Lock Identifier to submit your lock details for expert review and replacement recommendations.